Cubase Vocal Chain: Stock Plugins, in Order, With Settings (VariAudio, DeEsser, Sends and Editions)
A Cubase vocal chain built from Steinberg's stock plugins: VariAudio or Pitch Correct for tuning, StudioEQ (or Frequency 2 in Pro), Compressor into VintageCompressor, a tone EQ, DeEsser, Magneto II or DaTube for warmth, and StereoDelay plus REVerence or RoomWorks on effect channel tracks. Which plugins Cubase Pro, Artist and Elements include, where Steinberg puts the DeEsser, the VocalChain plugin, a settings chart by genre, the sends setup, and how to save it as a track preset.
The short answer: a Cubase vocal chain runs on Steinberg's stock plugins, in this order: tune first (VariAudio in Cubase Pro and Artist, or Pitch Correct in any edition), then StudioEQ (or Frequency 2 in Pro) for a high-pass and cleanup, Compressor for fast peak control, VintageCompressor for smooth leveling, a second StudioEQ for tone and air, DeEsser, and an optional touch of Magneto II (Pro and Artist) or DaTube for warmth. Put StereoDelay and a reverb (REVerence in Pro, RoomWorks or RoomWorks SE in every edition) on effect channel tracks fed by sends, and save the vocal track as a track preset. Pitch Correct, StudioEQ, Compressor, VintageCompressor, DeEsser, StereoDelay, RoomWorks and RoomWorks SE are in Cubase Pro, Artist and Elements, so every edition can build the core of it.
This is the same structure I use on the vocals for my own releases (Sony, Universal, Ultra, Dim Mak), and the same one my Waves vocal chain is built around. The DAW changes; the order doesn't. Every plugin name and edition below is checked against Steinberg's Cubase 16 plug-in references and edition comparison. Once the vocal sits and the mix is bounced, the Cubase mastering chain finishes the song with stock plugins in the same DAW.
The chain, in order
| Slot | Plugin (editions) | Job | Starting point |
|---|---|---|---|
| Before | VariAudio (Pro, Artist) or Pitch Correct (all) | Tuning | Edit notes in VariAudio before you mix, or Pitch Correct in the first insert slot |
| 1 | StudioEQ (all) or Frequency 2 (Pro) | Clean up | High-pass 80 to 120 Hz, cut mud at 200 to 400 Hz by 2 to 4 dB |
| 2 | Compressor (all) | Catch peaks | Ratio 4:1, fast Attack, Analysis toward peak, 2 to 4 dB of reduction on the loudest words |
| 3 | VintageCompressor (all) | Level the performance | Input up for 2 to 3 dB of steady reduction, Release on Auto, Punch on |
| 4 | StudioEQ (all) | Tone and air | Broad +1 to 2 dB around 3 to 5 kHz, gentle high shelf above 10 kHz |
| 5 | DeEsser (all) | Tame esses | Band around 5 to 8 kHz found with Solo, 2 to 4 dB on esses only |
| 6 | Magneto II (Pro, Artist) or DaTube (all) | Warmth and density | Low Saturation, Frequency Range Low at 200 to 300 Hz; or DaTube with Mix low |
| FX 1 | StereoDelay (all) | Delay | Synced 1/8 dotted or 1/4, low feedback, Lo and Hi Filter on, Mix at maximum |
| FX 2 | REVerence (Pro), RoomWorks or RoomWorks SE (all) | Space | Plate or room, pre-delay 30 to 80 ms, high-passed, fully wet |
Exact delay and pre-delay times for your tempo are in the delay and reverb calculator.
Steinberg moves features between editions from version to version, so check your own plug-in list. If a plugin is missing from your menu, the edition table further down has the stand-in.
Tune first: VariAudio or Pitch Correct
Tuning goes before the chain, so the compressors and the de-esser react to the notes you're keeping. Cubase gives you two tools, and Steinberg's edition comparison lists them differently.
- VariAudio (Cubase Pro and Artist). Steinberg describes it as pitch, timing and intonation editing for individual notes in monophonic vocal recordings, done in the Sample Editor or the lower zone editor, and fully undoable. Cubase first analyzes the audio and splits it into segments, one per note. Open the vocal in the Sample Editor, turn on Edit VariAudio in the VariAudio section of the inspector, select the segments to fix, and move the Correct Pitch slider to the right; Steinberg says the segments are corrected toward the nearest semitone. Steinberg notes it's optimized for monophonic vocals, so tune a lead, not a stack of harmonies on one track.
- Pitch Correct (every edition, including Elements). A real-time plugin for slight pitch and intonation problems in monophonic vocals, with formant preservation. Correction Speed sets how fast it pulls (Steinberg calls 100 "a very drastic setting" designed mainly for effects), Tolerance sets how much vibrato it lets through before treating it as a new note, Scale Source picks the scale (Chromatic, Major or Minor, Custom, a MIDI scale or the chord track), and Optimize can be set to General, Male or Female. Leave the formant Preservation switch on unless you want the cartoon voice; Steinberg says with it off, big corrections turn into Mickey Mouse or monster sounds.
For a natural pop or R&B lead, edit the notes in VariAudio and leave the plugin off. For the hard-tuned effect, Pitch Correct in the first slot with the song's scale and a high Correction Speed. How to tune vocals covers when to use real-time correction and when to edit note by note, and Auto-Tune vs Melodyne explains the same split with third-party tools.
Stage notes
StudioEQ first, and the Strip comes after. StudioEQ is in every edition; Frequency 2 is Cubase Pro only, and its dynamic bands can tame a resonance that only rings on loud notes. One Cubase detail from Steinberg's default signal flow: a channel's insert slots run before its Strip, where the built-in channel EQ lives. So a move in the channel EQ lands after your whole insert chain. Either leave the channel EQ flat or know where it sits. How to EQ vocals has the full frequency map.
Two compressors beat one. Compressor catches the peaks: Steinberg's Analysis control runs from pure peak (0) to pure RMS (100), and peak suits the fast job. VintageCompressor levels what's left: it has no ratio knob, so Input sets the amount, Release on Auto follows the performance, and Punch, in Steinberg's words, preserves the early attack phase even with short attack settings, so the consonants stay crisp. Each does a little; together the vocal sits forward without sounding squashed. How to compress vocals covers why two light stages beat one heavy one. Tube Compressor (every edition) is the warmer swap for the second stage, and VoxComp (Pro and Artist) is Steinberg's compressor designed for vocals, with a Dry/Wet control for parallel compression.
DeEsser: where Steinberg puts it, and where this chain puts it. Steinberg's own reference places DeEsser after the mic preamp and before a compressor, so the compressor doesn't react to the esses. The other stock chains in this series put the de-esser after compression, because compression and an air boost bring the esses up. Both work. Start it after the tone EQ as in the table; if the compressors grab on every s, move it to slot 1 instead. Set the band with Solo, click Diff to hear exactly what it removes, and use Reduction for the amount. Auto sets the threshold for you, but Steinberg notes it doesn't work below about -30 dB peak, so set Threshold by hand on a quiet take. What a de-esser does, and how stock de-essers compare with paid ones in the best de-esser plugins.
Air goes after control. Boosting the top before compression means the compressors react to the boost. Shape tone once the dynamics are steady; how to add air to vocals covers the shelf.
Saturation is optional. Magneto II simulates tape, and Steinberg's own tip for it is to set the Frequency Range Low to 200 or 300 Hz so the lows don't saturate, with HF-Adjust to tame the top. On Elements, DaTube (Drive, Mix, Output) or the Strip's Sat module does the job; keep the Mix low.
Live mode while recording. Compressor, DeEsser and VoxComp each have a Live button that switches off their look-ahead. Steinberg says look-ahead is more accurate but adds latency, so turn Live on while a singer is tracking through the chain and off again for the mix.
The VocalChain plugin (Pro and Artist)
Cubase Pro and Artist also ship VocalChain, a single plugin with modules you activate and reorder: Cut Filter, Gate, Pitch, De-Esser, two dynamic filters, Compressor (VoxComp, Transparent, Extreme and Black Valve types, with Dry/Wet for parallel compression), EQ (Studio, P1A and M5 styles), Exciter, Saturator (Tape, Tube or Distortion), Imager, and a Delay and Reverb, each with a Ducker. Steinberg groups them into Clean, Character and Send categories, and the order of the list is the signal chain. It's the same chain as this page in one window. Building it from separate plugins teaches you what each stage does; VocalChain is faster once you know. Every edition, Elements included, also has VocalTouch, a simpler one-window vocal processor with a Style selector and Dynamics, EQ, Reverb, Delay and Saturation controls.
Pro, Artist or Elements: what each edition has
From Steinberg's Cubase 16 plug-in reference for each edition and its edition comparison.
| Stage | Cubase Pro | Cubase Artist | Cubase Elements |
|---|---|---|---|
| Note editing | VariAudio | VariAudio | None (Pitch Correct only) |
| Real-time tuning | Pitch Correct | Pitch Correct | Pitch Correct |
| Cleanup EQ | Frequency 2, StudioEQ | StudioEQ | StudioEQ |
| Compression | Compressor, VintageCompressor, Tube Compressor, VoxComp, Black Valve | Compressor, VintageCompressor, Tube Compressor, VoxComp | Compressor, VintageCompressor, Tube Compressor |
| De-essing | DeEsser | DeEsser | DeEsser |
| Saturation | Magneto II, Quadrafuzz v2, DaTube | Magneto II, Quadrafuzz v2, DaTube | DaTube, the Strip's Sat module |
| Delay | StereoDelay, MonoDelay, PingPongDelay, StudioDelay | StereoDelay, MonoDelay, PingPongDelay, StudioDelay | StereoDelay, MonoDelay, PingPongDelay |
| Reverb | REVerence, RoomWorks, RoomWorks SE, REVelation, Shimmer | RoomWorks, RoomWorks SE, REVelation, Shimmer | RoomWorks, RoomWorks SE |
| All-in-one | VocalChain, VocalTouch | VocalChain, VocalTouch | VocalTouch |
REVerence is a convolution reverb: it loads impulse responses of real spaces, and Steinberg warns it can use a lot of RAM because every loaded program sits in memory, so load only the programs you need. RoomWorks is the algorithmic option with input filters and a Wet only button; RoomWorks SE is the lighter version with fewer controls and less CPU.
Settings chart by genre
Starting points on top of the chain above. Set the final amounts with the beat playing, not with the vocal soloed.
| Genre | Tuning | Compression (both stages) | DeEsser | Delay send | Reverb send | Watch for |
|---|---|---|---|---|---|---|
| Pop | VariAudio, notes corrected but vibrato left in | 4 to 6 dB total | 2 to 4 dB, band around 6 to 8 kHz | 1/8 dotted, low, ducked | Plate, 1.2 to 2 s, pre-delay 30 to 60 ms | Air boost bringing the esses back |
| Rap | Pitch Correct only if the hook is sung | 6 to 8 dB total, firmer first stage | 3 to 5 dB | Short slap or 1/8, quiet | Short room, low | The vocal fighting the 808 below 150 Hz |
| R&B | VariAudio note by note, runs left natural | 4 to 6 dB, VintageCompressor doing most | 2 to 4 dB | 1/4 or 1/8 dotted, ducked, filtered | Plate or hall, 1.5 to 2.5 s | Long reverb washing out the runs |
| Dance and EDM | Pitch Correct at high Correction Speed for the tuned sound, or VariAudio for natural | 5 to 8 dB total | 3 to 5 dB | 1/8 dotted or 1/4, ducked, wider | Plate or hall, longer tails on breakdowns only | Tails smearing the drop; Pitch Correct warbling on notes outside the scale |
The same stages pushed for each style are in the pop vocal chain, the rap vocal chain, the R&B vocal chain and the EDM vocal chain.
Sends: delay and reverb on effect channel tracks
- Add the delay send. Select the vocal track, open the Sends section in the Inspector, right-click an empty send slot and choose Add Effect Track to Send. Pick StereoDelay as the effect and a stereo configuration (Steinberg notes StereoDelay works only on stereo tracks; MonoDelay is the mono option). Name it Vocal Delay.
- Add the reverb send the same way, with REVerence, RoomWorks or RoomWorks SE. Name it Vocal Reverb.
- Set both fully wet. Steinberg's advice for delays used as send effects is to set Mix to the maximum and control the balance with the send level; RoomWorks has a Wet only button for the same job, and RoomWorks SE's Mix goes to 100%.
- Keep the sends post-fader. Steinberg's manual explains pre- and post-fader sends and how to switch one: open the vocal's Channel Settings, right-click the send and choose Move to Pre-Fader or Move to Post-Fader. Post-fader means the effects follow the vocal's level.
- Filter the returns. Use StereoDelay's Lo Filter and Hi Filter (they act on the feedback loop, so each repeat gets darker and thinner), and put a StudioEQ high-pass around 250 to 400 Hz after the reverb on its effect channel, so the effects never add mud under the voice.
- Duck the delay from the vocal. StereoDelay and MonoDelay support external side-chaining: when the side-chain signal goes over the threshold, Steinberg says, the repeats are silenced, and they come back when it drops. Activate Side-Chaining on the delay, add the vocal track as the side-chain source, and the echoes bloom only in the gaps. The full method is in how to sidechain a delay.
Space on sends instead of on the vocal track is the single biggest difference between a demo vocal and a finished one. Reverb vs delay covers when to lean on which.
Save it as a track preset
Once the chain sounds right, select the vocal track, right-click it in the track list and choose Save Track Preset, then name it. Steinberg's manual says track presets can be made from effect channel tracks too, so save Vocal Delay and Vocal Reverb the same way, or keep all three in a project template. Next session, add a track from the preset and the whole chain comes back in order. Steinberg also warns that applying a track preset can't be undone, so apply it to a fresh track, not one you've already set up.
Cubase vocal chain mistakes
- Tuning after the chain. The compressors and DeEsser react to notes you then move. Tune first.
- VariAudio on a stack of harmonies. Steinberg optimized it for monophonic recordings; split the parts onto their own tracks.
- Correction Speed at 100 on a natural vocal. Steinberg calls that setting drastic and designed for effects.
- A channel EQ move you think is first in line. By default the Strip runs after the inserts, so it lands after the compressors and the DeEsser.
- DeEsser on Auto with a quiet take. Steinberg says Auto doesn't work below about -30 dB peak; set Threshold by hand.
- Look-ahead on while tracking. Turn on Live on Compressor, DeEsser and VoxComp so the singer hears no extra latency, then switch it off for the mix.
- Reverb as an insert at 30% Mix. You lose control of the return's EQ and level, and every vocal gets its own reverb. One effect channel per space.
- Loading every REVerence program in the matrix. Each one sits in RAM. Load what you use.
What a chain can't do
It can't fix a bad recording. Room echo and clipping come through every chain, so record it clean first, and balance the vocal against the beat in context rather than in solo. If you're on a different DAW, the same stages with stock tools are in the Logic Pro vocal chain, the Pro Tools vocal chain, the Ableton vocal chain and the FL Studio vocal chain. When the mix is bounced, the Cubase mastering chain covers the Stereo Out stage, from StudioEQ to Brickwall Limiter, and why the chain never goes in the Control Room.
A finished chain, today
My full vocal chain is 15 Waves plugins in one StudioVerse file, with a serial core, a parallel split for space, width, and an octave layer, and 8 macros (Low Cut, Glue, Air, Reverb, Delay, Slap, FX, Widener). The Ultimate Vocal Chain runs in any DAW that runs Waves plugins, Cubase included, with the free StudioVerse plugin and the 15 Waves plugins listed on its page; it doesn't use any of the Cubase plugins above. With the macros where they start, it gives you Scheps 73 preamp warmth, parallel compression, the top-end shine of CLA Vocals, de-essing and multiband control. It doesn't tune; tune first, with VariAudio or Pitch Correct. The product page has a loudness-matched before/after player, so you can hear it on a real vocal before you buy. Check the plugin list on the page first; the chain needs all 15 to open as intended. I'm biased; any tuner above, followed by a chain in the right order, does the job.
Runs inside Cubase
THE ULTIMATE VOCAL CHAIN
My vocal chain in one Waves StudioVerse file: 15 Waves plugins, a parallel split, and 8 macros (Low Cut, Glue, Air, Reverb, Delay, Slap, FX, Widener). Tune first in VariAudio or Pitch Correct, then drop it on your lead vocal. $39, free updates.
See the Vocal ChainQuick answers
What is a good vocal chain in Cubase? Tune first with VariAudio or Pitch Correct, then StudioEQ (or Frequency 2), Compressor, VintageCompressor, a second StudioEQ, DeEsser and an optional Magneto II or DaTube, with StereoDelay and REVerence or RoomWorks on effect channel tracks fed by sends.
Does Cubase Elements have VariAudio? No. Steinberg's edition comparison lists VariAudio for Cubase Pro and Artist only. Elements has Pitch Correct, the real-time tuning plugin, which every edition includes.
Does Cubase have a stock de-esser? Yes, DeEsser, in Pro, Artist and Elements. Steinberg places it after the preamp and before the compressor; after the compressors and the air EQ works too, as long as you use Diff to check it only takes the esses.
How do I save a vocal chain in Cubase? Right-click the vocal track and choose Save Track Preset. Save the delay and reverb effect channel tracks as track presets too, or keep all three in a project template.
Written by
CHARLIE CROWN
Founder of Born Creative Audio. Independent artist and engineer: 50M+ streams, 100% owned, never signed a record deal. Also founder of Born Creative Records. Work-for-hire remixes for Sony, Ultra, and Dim Mak. FabFilter featured artist; endorsed by iZotope, Sonarworks, and McDSP. Everything on this site comes from running a real independent music business, not theory.
Stay in the loop
KEEP READING
Production insights, release breakdowns, and independent artist strategies — straight to your inbox.