YOUR CART

Nothing in your cart yet.

← All Notes
·9 min read

Techivation T-De-Esser 2 Explained: Every Control, the Four Frequency Ranges, and a Settings Chart by Job

Techivation's T-De-Esser 2 is a free de-esser with four Frequency Range buttons, one big Processing knob, Intensity and Sharpness. What every control does, what the four ranges cover (Low-Hi, Mid-Hi, High, Hi-End), why it compresses the whole signal and how that differs from a split-band de-esser and a dynamic EQ, a settings chart for male, female and rap vocals, backing vocals, hats and a full mix, where it goes in a vocal chain, and the mistakes.

mixingvocalsplugins
Techivation T-De-Esser 2 Explained: Every Control, the Four Frequency Ranges, and a Settings Chart by Job

The short answer: Techivation T-De-Esser 2 is a free de-esser with very few controls. Four Frequency Range buttons pick where it listens (Low-Hi 1 to 4 kHz, Mid-Hi 2 to 4 kHz, High 5 to 10 kHz, Hi-End 5 to 20 kHz), the big Processing knob is the threshold, Intensity works like a ratio and Sharpness like a knee. The thing to understand: when the range you picked crosses the threshold, T-De-Esser 2 compresses the whole signal, not just that range. That makes it a wideband de-esser, which sounds natural on a single vocal and gets clumsy on a full mix. For a lead vocal, switch Filter on, pick the range where the esses jump out (usually High), switch Filter off, and lower Processing until the loudest esses come down 2 to 4 dB and the vowels don't move. It's free from techivation.com for personal and commercial use, in VST, VST3, AU and AAX on macOS (Intel and Apple Silicon) and VST, VST3 and AAX on Windows, plus a free iPad version. The Download button asks you to create a free Techivation account; there's no activation after that.

Every vocal on my releases (Sony, Universal, Ultra, Dim Mak, 50M+ streams) goes through at least one de-esser, often two light ones. T-De-Esser 2 is the simple free pick in the best de-esser plugins, and this is the control-by-control version. It's free and there are no affiliate links on this page. I sell a vocal chain with de-essing built in, disclosed at the end; it uses Waves plugins, not T-De-Esser 2.

What T-De-Esser 2 is

Techivation describes it as "an intuitive and user-friendly De-Esser plugin designed to smooth out high frequencies while preserving a natural and musical sound," and its manual calls it the MK2 of the original T-De-Esser. The uses Techivation lists go past vocals: sibilance in vocals and dialog, harshness on close-mic'd sources, glare on bright guitar and piano recordings, piercing synths, the high end of overheads (snare, hi-hats, crashes), and harsh frequencies on a master.

What to know before installing it:

  • Free, with an account. The "Download FREE" button leads to Techivation's Create Account page, and the manual says the download comes with your sign-up. After that, per the manual, "as soon as you download and install the plug-in, you're ready to go": no license to activate. Commercial releases are allowed. Techivation doesn't allow third parties to re-host the installers, so get it from techivation.com.
  • Version. Techivation's site lists T-De-Esser 2 at version 1.0.0 at the time of writing.
  • Formats and systems. Per the product page: macOS 10.11 or later as 64-bit VST, VST3, AU and AAX, on Intel and Apple Silicon; Windows 7 and up as 64-bit VST, VST3 and AAX (Pro Tools 11 and up); and iPadOS 12 or later through the App Store, where it's listed free. It runs on mono and stereo tracks. So it loads as AU in Logic, AAX in Pro Tools, and VST3 in FL Studio, Ableton Live, Cubase and Studio One.
  • Don't mix it up with the paid ones. Techivation also sells T-De-Esser Pro Mk2, M-De-Esser 2 and AI-De-Esser, and M-Clarity 2, a resonance suppressor covered in the soothe alternatives. This page is about the free one.

Every control, explained

Control names and descriptions are from Techivation's product page and the T-De-Esser 2 user manual. The readouts in brackets are from Techivation's own screenshot.

ControlWhat it doesHow to use it
Frequency RangeFour buttons that choose which part of the signal is analyzed for sibilance or harshness: Low-Hi (1 to 4 kHz), Mid-Hi (2 to 4 kHz), High (5 to 10 kHz), Hi-End (5 to 20 kHz)Pick it with Filter on; High for most esses
ProcessingThe big center knob, the sensitivity (shown in dB, -20.0 dB on the screenshot). When the targeted range exceeds this threshold, "the whole signal is compressed"Lower it until the esses trigger and the vowels don't
IntensityThe strength of the compression, which Techivation says "functions as a ratio control" (4.0:1 on the screenshot)Higher for firmer control, lower for gentler
SharpnessHow gradually compression starts as the targeted range approaches the threshold; it "functions as a knee control" (10 dB on the screenshot)More gradual for natural de-essing; harder for firm control
Make Up"Transparent gain" applied to the processed signalUsually 0 dB; a little if the part sits lower after de-essing
MixDry/wet blend, for parallel processing100% on a vocal; lower to soften it on buses
QualityOversampling to reduce aliasing: Off, Good (2X), Great (4X) or Ultra (8X)Great or Ultra for the bounce; lower if your CPU is struggling
FilterPlays only the frequency range the plugin is listening toOn while you choose the range, then off
DiffPlays the difference between the processed and original signals: what it's taking awayShould be esses only; if you hear words, raise Processing
Input and Output metersLevels before and after processingWith Make Up at 0 dB, the drop on an S between the two is roughly the reduction
On/OffAn internal bypass, built to avoid the clicks of bypassing in the hostCompare against it at matched level
A/B, CopyTwo settings to switch between, with Copy A to B and B to ATest a change without losing the first version
MenuPresets, Save and Load, Undo and Redo, GUI scale (50% to 150%), tooltipsTurn tooltips on while you learn it

What it doesn't have: there's no attack or release control, no free frequency knob (only the four ranges), no split-band mode and no external sidechain input; Techivation lists none of them. Techivation doesn't say which way Sharpness is more gradual, so set it with Diff and your ears. Techivation also publishes a preset pack for it, covering Male Vocals, Female Vocals, Male Speech, Female Speech, Drums, Snare Drum, Hi-hats, Shaker, Mallets, Guitar, Piano and Synth Keys; load the closest one, then reset Processing for your track's level.

The four frequency ranges

RangeWhat it listens toWhat lives thereUse it for
Low-Hi1 to 4 kHzUpper-mid bite and harshnessHarsh vocals that bite low, glare on guitar and piano
Mid-Hi2 to 4 kHzThe harsh zoneVocals that turn piercing on loud notes
High5 to 10 kHzSibilance: S, T, SH and CH soundsMost vocal de-essing
Hi-End5 to 20 kHzSibilance plus air and cymbal fizzBright, airy esses, hats and cymbals

Those spans are the manual's, and yes, the two lower ones overlap; Low-Hi reaches further down. The split between them matches the one in how to fix harsh vocals: harshness lives roughly between 2 and 5 kHz, sibilance roughly between 5 and 10 kHz, and they need different fixes. With Low-Hi or Mid-Hi selected, T-De-Esser 2 is really a harshness-triggered compressor. That works on a vocal that only bites when the singer pushes, but because it turns the whole voice down on every trigger, a narrow dynamic EQ band is usually the better harshness tool.

Wideband vs split-band vs dynamic EQ

All three listen to a frequency range and react when it gets loud. The difference is what they turn down.

TypeWhat it turns downExamplesGood atWeak at
Wideband (range-triggered)The whole signal, for the length of the triggerT-De-Esser 2; Logic DeEsser 2 set to WideA single vocal, where an S mostly stands aloneFull mixes and buses, where everything else dips too
Split-bandOnly the bandLogic DeEsser 2 set to Split; FabFilter Pro-DS in split-band modeKeeping the body of the voice untouchedA lisp when it's pushed, because it can take too much of the band
Dynamic EQOnly the bell or shelf you drewTDR NovaNarrow, precise cuts on one frequencyYou do the finding, band by band

Why wideband works on a vocal: an S is mostly a consonant on its own, so turning the whole voice down for the length of the S removes the spike without changing the vowels around it. What a de-esser is makes the same point: wideband can sound more natural, especially in sparse mixes. Where it breaks: anything with other sound playing during the trigger. On a drum bus, every hi-hat ducks the kick; on a full mix, every bright moment ducks the song. When the problem is one narrow frequency, or the source is a mix, reach for a dynamic EQ instead; the best dynamic EQ plugins has the free and paid options.

T-De-Esser 2 settings chart, by job

Processing depends on how loud the track is, so the chart sets it by reduction, not by a number: lower it until the loudest esses come down by the amount in the chart, and read that as the drop between the Input and Output meters with Make Up at 0 dB. Techivation doesn't publish the Intensity range, so the chart uses the 4.0:1 on its screenshot as the reference point. Confirm every setting with Diff.

JobRangeIntensityMixReduction on the loudest essesWatch for
Male vocalHighAround 4:1100%2 to 4 dBA lisp ("sister" turning into "thither"); try Hi-End if his esses sit high
Female vocalHigh, or Hi-End if the esses sit higher and airierAround 4:1100%2 to 4 dBA dull top; if Hi-End triggers on air, go back to High
Rap vocalHighAbove 4:1100%3 to 5 dBFast, S-heavy bars pumping word by word; raise Processing a little
Backing vocals and doubles (on the stack's bus)HighAbove 4:1100%More than the leadThe stack going dull against the lead
Hats and cymbalsHi-EndAround 4:1100% on a hat track; 50 to 70% on overheads1 to 3 dBThe kick and snare dipping with every bright hit on overheads; lower Mix
Harsh vocal (upper mids, not esses)Mid-Hi, or Low-Hi if the bite sits lowerBelow 4:1100%1 to 2 dB on the loudest notesThe whole voice dropping on every loud note; switch to a dynamic EQ band
A full mix, gentlyHi-End or HighBelow 4:130 to 50%1 dB at mostThe whole song dipping on hats and esses; fix it in the mix instead

The rap and stack rows follow the doses in the rap vocal chain (3 to 5 dB on the esses, because compression exaggerates them) and the pop vocal chain, where esses add up across layers so the stack gets de-essed harder than the lead. The full-mix row exists because Techivation lists mastering among its uses; keep it tiny, or don't do it at all.

How to set it up in a vocal chain

Techivation's own setup order is Filter first, then a range, then Processing, then Intensity and Sharpness. On placement, Techivation recommends it first in the chain, or after the EQ, and describes a two-instance setup: one T-De-Esser 2 to fix sibilance and harshness, an EQ to brighten, then a second T-De-Esser 2 to smooth the boosted top. The rule in the vocal chain order is after compression, because compressors bring esses up. Put together: tune, clean up, an optional light pass first, compress, add air, then the main pass.

  1. Download it from techivation.com and create the free account. Free-plugin mirrors are how adware gets installed; the Camel Crusher story is the cautionary tale.
  2. Tune and clean the vocal first. Comp the takes, tune, and high-pass before any de-essing. How to mix vocals has the full sequence.
  3. Insert it after your compressors and any air boost. If the raw vocal is very spitty, add a second, lighter instance before the compressor too.
  4. Switch Filter on and play the most sibilant line. Step through the four ranges and keep the one where the esses are loudest against the rest of the voice. Switch Filter off.
  5. Lower Processing while the loudest esses play, until the Output meter drops 2 to 4 dB on each S and doesn't move on vowels.
  6. Press Diff. You should hear only esses. If you hear words, raise Processing.
  7. Shape it with Intensity and Sharpness. More Intensity for firmer control; a more gradual Sharpness if you hear it switching on and off.
  8. Set Quality to Great or Ultra for the bounce, if your CPU allows.
  9. Compare with the On/Off switch at matched level, then check on earbuds at normal volume, where sibilance shows up first.

Mistakes that make it sound bad

  • Using it on a full mix or drum bus like a split-band de-esser. It turns everything down on every trigger.
  • Hi-End on a vocal that's already dull. The range includes the air, so it triggers on brightness, not just esses.
  • The wrong range for the problem. High won't fix a 3 kHz bite, and Mid-Hi won't fix esses. Diagnose first.
  • Too much reduction. More than about 4 dB on the esses and the singer starts to lisp.
  • De-essing only before the compressor. The compressor brings the esses back. De-ess after it, or both sides lightly.
  • An air shelf after it. Boost the air first and let the de-esser catch what the boost exaggerated; how to add air to vocals covers that order.
  • Judging on studio monitors only. Sibilance hides there and jumps out on phones and earbuds.
  • Expecting it to fix the recording. A bright mic pointed straight at the mouth bakes in esses no plugin removes cleanly; how to record vocals at home has the off-axis fix.

T-De-Esser 2 vs other free and stock de-essers

De-esserPriceTypeWhat you setBest for
Techivation T-De-Esser 2Free (account)Wideband, range-triggeredFour ranges, threshold, ratio, knee, MixFast de-essing on a single vocal, hats, harshness in a pinch
TDR NovaFreeDynamic EQ, four bandsAny frequency, shape, threshold, attack and releasePrecise, narrow de-essing and harshness
Logic DeEsser 2StockSplit or WideFrequency, Peak or Lowpass filter, Threshold, Max Reduction, Relative mode, Filter SoloLogic users
Pro Tools Dyn3 De-EsserStockSplit or wideband, set by the HF Only buttonFrequency, Range (0 to -40 dB of reduction), HF OnlyPro Tools users
Ableton Multiband DynamicsStock workaround (Standard and Suite)One band compressingCrossovers, threshold, ratioLive users; Live has no dedicated de-esser
FL Studio Maximus or Fruity Multiband CompressorStock workaroundOne band compressingBand split, threshold, ratioFL users; check your edition
Clip gain by handFreeManualEach S, one at a timeAn exposed lead vocal

T-De-Esser 2 is the fastest of these to set, and Nova is the most precise; the TDR Nova guide has its de-essing band settings. If you outgrow both, FabFilter Pro-DS is the paid pick in the best de-esser plugins, with wideband and split-band processing. Full disclosure: FabFilter lists me as a featured artist, and I'd recommend their plugins either way.

Where I land (and the disclosure)

T-De-Esser 2 earns its place as the quickest free de-esser to set: four buttons, one big knob, and Diff to prove it's only taking esses. Know that it's wideband, keep it on single sources, and reach for a dynamic EQ when the problem is narrow or the source is a mix.

De-essing is one stage of a chain, and it only works when the compression and air around it are set. The Ultimate Vocal Chain is my vocal chain in one Waves StudioVerse file: 15 Waves plugins in a serial core plus a parallel split, with 8 macros (Low Cut, Glue, Air, Reverb, Delay, Slap, FX, Widener). With the macros where they start, it gives you Scheps 73 preamp warmth, parallel compression, the top-end shine of CLA Vocals, de-essing (Waves DeEsser is on its plugin list) and multiband control (C6), and the Air macro opens the top above 12 kHz without harshness. It doesn't tune; tune first. It runs in any DAW that runs Waves plugins, with the free StudioVerse and the 15 Waves plugins listed on its page, and the product page has a loudness-matched before/after player, so you can hear it on a real vocal before you buy. It doesn't use T-De-Esser 2. I'm biased; T-De-Esser 2 after your compressor does the de-essing job for free.

De-essing, already in the chain

THE ULTIMATE VOCAL CHAIN

My vocal chain in one Waves StudioVerse file: 15 Waves plugins, a parallel split, and 8 macros (Low Cut, Glue, Air, Reverb, Delay, Slap, FX, Widener). De-essing and multiband control are built in. Tune first, then drop it on your lead vocal. $39, free updates.

See the Vocal Chain

Quick answers

Is Techivation T-De-Esser 2 free? Yes, for personal and commercial use. You download it from techivation.com after creating a free account, and there's no activation after install. The iPad version is free on the App Store.

Is T-De-Esser 2 a wideband or split-band de-esser? Wideband. Techivation says that when the targeted frequency range exceeds the Processing threshold, the whole signal is compressed. It has no split-band mode.

What frequency range should I use on vocals? High (5 to 10 kHz) for most esses, Hi-End (5 to 20 kHz) for bright, airy esses, and Mid-Hi (2 to 4 kHz) or Low-Hi (1 to 4 kHz) only for harshness. Switch Filter on to hear which one catches the problem.

Does T-De-Esser 2 work in FL Studio, Logic and Pro Tools? Yes. It loads as VST3 in FL Studio, Ableton Live, Cubase and Studio One, AU in Logic and AAX in Pro Tools (11 and up), on Windows 7 and up and macOS 10.11 and up, Intel and Apple Silicon.

Written by

CHARLIE CROWN

Founder of Born Creative Audio. Independent artist and engineer: 50M+ streams, 100% owned, never signed a record deal. Also founder of Born Creative Records. Work-for-hire remixes for Sony, Ultra, and Dim Mak. FabFilter featured artist; endorsed by iZotope, Sonarworks, and McDSP. Everything on this site comes from running a real independent music business, not theory.

Stay in the loop

KEEP READING

Production insights, release breakdowns, and independent artist strategies — straight to your inbox.